Panasonic microP2 Handheld AVC-ULTRA HD Camcorder Operating Instructions Basic - Page 174
Writing back to the P2 card from a storage device import, CLIP], COPY]
View all Panasonic microP2 Handheld AVC-ULTRA HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Chapter 8 Connecting to External Devices - Connection function via or terminal Writing back to the P2 card from a storage device (import) Importing from a [TYPE S] storage device or [P2STORE] by partition You can import (write back to a P2 card from as storage device) to a P2 card with the same part number as the source card by partition (card). 1 Insert a P2 card that will serve as the input destination. Make sure to insert a formatted P2 card. 2 Connecting a storage device. 3 Select [STORAGE] in the main menu → [CLIP] → [EXPLORE] to display the explorer screen. 4 In the explorer screen, display the partition thumbnails to be imported. 5 Select [IMPORT] in the main menu → [CLIP]. 6 Place the cursor on the P2 card slot number of the import destination and press the control stick. Start importing by selecting [YES] in the confirmation message. [COPY COMPLETED!] will be displayed when importing is completed. @@NOTE tt Importing to a P2 card that is different from the source P2 card may result in incomplete clips depending on the clips. In this case, use the reconnection function to reconfigure the clips. For details, refer to "Reconnecting incomplete clips" (page 115). tt You can select whether to perform verification at the time of copying in the main menu → [CLIP] → [STORAGE COPY SETUP] → [VERIFY]. tt You cannot import by partition to a P2 card of a different model. Perform copying by clip instead. Copying to a P2 card by clip You can specify a storage device clip and copy it to a P2 card. 1 Open the storage device thumbnail screen. 2 Select the clip you want to copy. 3 In the main menu → [CLIP] → [COPY] → [STORAGE] list, move the cursor over the copy destination and press the control stick. Start importing by selecting [YES] in the confirmation message. [COPY COMPLETED!] will be displayed when copying is completed. - 174 -