Panasonic microP2 Handheld AVC-ULTRA HD Camcorder Operating Instructions Basic - Page 82
Selecting video output, Selecting video output from each terminal
View all Panasonic microP2 Handheld AVC-ULTRA HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Chapter 4 Shooting - Multi formats Selecting video output The video output method can be selected. Video output, etc. can be selected by the setting of [SDI&HDMI SELECT], [3G‑SDI OUT], or [DOWNCON MODE] in the main menu → [OUTPUT SEL]. [SDI&HDMI SELECT] [3G‑SDI OUT] [DOWNCON MODE] Item Description of settings Selects output signals from the terminal and terminal. Selects the 3G‑HD SDI signal type output from the terminal from [LEVEL‑A] and [LEVEL‑B] at 1080P. Selects the mode of the down converter output signal from the or terminal in HD mode (1080P, 1080i, 1080/23.98PsF, or 720P). Selecting video output from each terminal ff"-" indicates an item that cannot be selected. [LINE&FREQ] [1080‑59.94P] [1080‑50P] [1080‑59.94i] [1080‑50i] [1080‑23.98PsF] [720‑59.94P] [720‑50P] [480‑59.94i] [576‑50i] Setting [SDI&HDMI SELECT] [SYSTEM MODE] [1080i] [DOWNCON] [SYSTEM MODE] [1080i] [DOWNCON] [SYSTEM MODE] [DOWNCON] [SYSTEM MODE] [DOWNCON] [SYSTEM MODE] [DOWNCON] [SYSTEM MODE] [DOWNCON] [SYSTEM MODE] [DOWNCON] - - - - - - terminal 1080/59.94P*1 1080/59.94i 480/59.94i 1080/50P*2 1080/50i 576/50i 1080/59.94i 480/59.94i 1080/50i 576/50i 1080/23.98PsF*2 480/59.94i 720/59.94P 480/59.94i 720/50P 576/50i 480/59.94i 576/50i Video output terminal 1080/59.94P 1080/59.94i 480/59.94P 1080/50P 1080/50i 576/50P 1080/59.94i 480/59.94P 1080/50i 576/50P - - 720/59.94P 480/59.94P 720/50P 576/50P terminal 480/59.94i 480/59.94i 480/59.94i 576/50i 576/50i 576/50i 480/59.94i 480/59.94i 576/50i 576/50i 480/59.94i 480/59.94i 480/59.94i 480/59.94i 576/50i 576/50i 480/59.94P 480/59.94i 576/50P 576/50i *1 Output type can be selected from [LEVEL‑A] and [LEVEL‑B] in the main menu → [OUTPUT SEL] → [3G‑SDI OUT]. [LEVEL‑B] is set in the factory settings. *2 When [LINE&FREQ] is set to [1080‑23.98PsF] and [SDI&HDMI SELECT] is set to [SYSTEM MODE], video output from the terminal in thumbnail mode or playback mode (including recording check) becomes 1080/60P. In addition, it is not output from the terminal. When the mode is changed between the camera mode and thumbnail mode (or playback mode), video signal output from the terminal and the terminal may be disrupted, or video on the LCD monitor and viewfinder may be disrupted. - 82 -