Panasonic microP2 Handheld AVC-ULTRA HD Camcorder Operating Instructions Basic - Page 181

Chapter 9 Network Connection - Preparing for connection For wireless module other than AJ‑WM30 Connect the wireless module other than AJ‑WM30 (optional) to the camera. The grip belt can be removed. Turn off the power of the camera before connecting or disconnecting the wireless module. button terminal Fig. 1 USB 2.0 extension cable Fig. 2 Cord cap Cord cap compartment Fig. 3 Wireless module Fig. 4 Fig. 5 Fig. 6 1 Press the button and remove the cover by sliding it in the direction of the arrow. (Fig. 1) 2 Connect the USB 2.0 extension cable (optional: type A male/female, 0.2 m) to the terminal. (Fig. 2) 3 Remove the cord cap inside the removed cover (Fig. 3), pass the USB 2.0 extension cable there, and slide the cover to close. (Fig. 4) The removed cord cap can be stored in the cord cap compartment inside the cover. 4 Pass the USB 2.0 extension cable through the grip belt compartment. (Fig. 5) 5 Connect the wireless module. (Fig. 6) The wireless module can be stored in the grip belt. @@NOTE tt For details on wireless modules that can be connected, refer to the support desk at the following website. http://pro-av.panasonic.net/en/sales_o/p2/server/4glte.html http://pro-av.panasonic.net/en/sales_o/p2/server/wireless_module.html For wired LAN Connect a LAN cable. LAN cable (optional) 1 Connect the LAN cable to the terminal on the rear side. - 181 -