Panasonic microP2 Handheld AVC-ULTRA HD Camcorder Operating Instructions Basic - Page 39

Assigning functions to the USER buttons, Selectable functions

Page 39 highlights

Chapter 3 Preparation - Assigning functions to the USER buttons Assigning functions to the USER buttons Selected functions can be assigned to USER1 to USER8. Set the functions to be assigned to [USER1] to [USER8] in the main menu → [USER SW]. Check the setting details using the button. The following button functions are assigned to USER1 to USER8 as the factory settings. (The numbers of the USER buttons are displayed in the camera.) ffUSER1: ffUSER2: ffUSER3: ffUSER4: ffUSER5: ffUSER6: ffUSER7: ffUSER8: USER3 USER1 USER4 USER2 USER8 USER7 USER5 USER6 Selectable functions Item [INHIBIT] [SCENE FILE SEL] [LEVEL GAUGE] [LEVEL GAUGE RESET] [WFM] [D.ZOOM] [DRS] [FBC] [S.GAIN] [1S.EXP.] [ATW] [ATW LOCK] [SPOTLIGHT] [BACKLIGHT] [BLACKFADE] [WHITEFADE] [A.IRIS LEVEL] [IRIS] [Y GET] [FOCUS ASSIST] [FOCUS MACRO] [OIS] [FAST ZOOM] [ZEBRA] [EVF ON/OFF] [PRE REC] [TEXT MEMO] Description Disables assignment of functions. Assigns the function to display the screen (the main menu → [SCENE FILE] → [FILE SELECT]) in which users select the scene file. Switches the level gauge display function to enabled/disabled. Assigns the function to set the level gauge using the current horizontal and vertical directions as reference values. Holding down the assigned button will reset to the factory setting. Assigns the function for switching the waveform display. Select the waveform display from the main menu → [SW MODE] → [WFM MODE]. Assigns the digital zoom function. Zooms in on the field angle by 2x, 5x, and 10x vertically and horizontally. Assigns the dynamic range stretcher function. Switches the flash band compensation function to enabled/disabled. Assigns the function that increases the gain to 24 dB or more. Select the gain value from the main menu → [SW MODE] → [SUPER GAIN]. Enables/disables the one second exposure function. Switches the auto tracking white balance functions to enabled/disabled. Fixes the white balance value when pressing this item while the auto tracking white balance function is activated. Resumes the auto tracking white balance function when pressing again. Switches the auto iris control function for the spot light to enabled/disabled. Switches the auto iris control function for the backlight compensation to enabled/disabled. Assigns the functions that fade out the entire image as black. Assigns the functions that fade out the entire image as white. Switches the auto iris setting function to enabled/disabled. Assigns the function for switching the auto iris and manual iris. Assigns the function for displaying the luminance level of the image at the position indicated by the square marker displayed near the center. Enables/disables the focus assist function which is set in the main menu → [SW MODE] → [FOCUS ASSIST MODE]. Switches the macro focus setting. You can set the macro function effects in the main menu → [SW MODE] → [MACRO MODE]. Switches the image stabilizer to enabled/disabled. Speeds up the zoom speed when the zoom lever (with the HANDLE ZOOM switch at the handle side set to ) is pushed in to the end. Assigns the display function of the zebra pattern and marker. Assigns the function that forces images to be displayed in the viewfinder. Assigns the function for switching the pre-recording function to enabled/disabled. Assigns the text memo function. - 39 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217

– 39 –
Chapter 3 Preparation — Assigning functions to the USER buttons
Assigning functions to the USER buttons
Selected functions can be assigned to USER1 to USER8.
Set the functions to be assigned to [USER1] to [USER8] in the main menu
[USER SW].
Check the setting details using the <DISP/MODE CHK> button.
The following button functions are assigned to USER1 to USER8 as the factory settings. (The numbers of the USER buttons are displayed in the
camera.)
f
USER1: <FOCUS ASSIST>
f
USER2: <MACRO>
f
USER3: <OIS>
f
USER4: <ZEBRA>
f
USER5: <WFM>
f
USER6: <A.IRIS.LEVEL>
f
USER7: <SLOT SEL>
f
USER8: <IRIS>
USER2
USER5
USER6
USER8
USER1
USER3
USER4
USER7
Selectable functions
Item
Description
[INHIBIT]
Disables assignment of functions.
[SCENE FILE SEL]
Assigns the function to display the screen (the main menu
[SCENE FILE]
[FILE SELECT]) in which users select the scene file.
[LEVEL GAUGE]
Switches the level gauge display function to enabled/disabled.
[LEVEL GAUGE
RESET]
Assigns the function to set the level gauge using the current horizontal and vertical directions as reference values. Holding down the
assigned button will reset to the factory setting.
[WFM]
Assigns the function for switching the waveform display. Select the waveform display from the main menu
[SW MODE]
[WFM
MODE].
[D.ZOOM]
Assigns the digital zoom function. Zooms in on the field angle by 2x, 5x, and 10x vertically and horizontally.
[DRS]
Assigns the dynamic range stretcher function.
[FBC]
Switches the flash band compensation function to enabled/disabled.
[S.GAIN]
Assigns the function that increases the gain to 24 dB or more. Select the gain value from the main menu
[SW MODE]
[SUPER
GAIN].
[1S.EXP.]
Enables/disables the one second exposure function.
[ATW]
Switches the auto tracking white balance functions to enabled/disabled.
[ATW LOCK]
Fixes the white balance value when pressing this item while the auto tracking white balance function is activated. Resumes the auto
tracking white balance function when pressing again.
[SPOTLIGHT]
Switches the auto iris control function for the spot light to enabled/disabled.
[BACKLIGHT]
Switches the auto iris control function for the backlight compensation to enabled/disabled.
[BLACKFADE]
Assigns the functions that fade out the entire image as black.
[WHITEFADE]
Assigns the functions that fade out the entire image as white.
[A.IRIS LEVEL]
Switches the auto iris setting function to enabled/disabled.
[IRIS]
Assigns the function for switching the auto iris and manual iris.
[Y GET]
Assigns the function for displaying the luminance level of the image at the position indicated by the square marker displayed near the
center.
[FOCUS ASSIST]
Enables/disables the focus assist function which is set in the main menu
[SW MODE]
[FOCUS ASSIST MODE].
[FOCUS MACRO]
Switches the macro focus setting. You can set the macro function effects in the main menu
[SW MODE]
[MACRO MODE].
[OIS]
Switches the image stabilizer to enabled/disabled.
[FAST ZOOM]
Speeds up the zoom speed when the zoom lever (with the HANDLE ZOOM switch at the handle side set to <VAR>) is pushed in to the
end.
[ZEBRA]
Assigns the display function of the zebra pattern and marker.
[EVF ON/OFF]
Assigns the function that forces images to be displayed in the viewfinder.
[PRE REC]
Assigns the function for switching the pre-recording function to enabled/disabled.
[TEXT MEMO]
Assigns the text memo function.