Panasonic microP2 Handheld AVC-ULTRA HD Camcorder Operating Instructions Basic - Page 85

Chapter 4 Shooting - Dual codec recording Dual codec recording Recording in different formats for main recording and sub recording can be performed on the camera. For sub recording, you can select HD proxy in AVC‑LongG 6 format with 1920×1080 resolution or one of three SD proxies with different resolution. The file format is MOV that is suitable for nonlinear editing. For the combination with the main recording, refer to "System modes and recording functions" (page 76). Dual codec recording setting Setting menu When recording proxy data with the camera, set in the main menu → [RECORDING SETUP] → [DUAL CODEC SETTING]. [CODEC USAGE] Item [PROXY REC MODE] [STREAMING MODE] [PROXY DISP] [QoS MAX RATE] [QoS MIN RATE] [STREAMING LATENCY] Description of settings Selects media for recording proxy data. [PROXY REC(P2)]: Records proxy data to a P2 card. [PROXY REC(P2&SD)]: Records proxy data to both of a P2 card and SD memory card. [STREAMING]: Outputs streaming. [OFF]: Does not record proxy data. ffFactory setting: [OFF] If the [CODEC USAGE] setting cannot be changed, change the [PROXY REC MODE] or [STREAMING MODE] setting. When [ONE FILE] is selected in the main menu → [RECORDING SETUP] → [FILE SPLIT], only [OFF] can be selected. Sets the recording mode of proxy data. [LOW 2CH MOV], [HQ 2CH MOV], [SHQ 2CH MOV], [AVC-G6 2CH MOV] ffFactory setting: [HQ 2CH MOV] Sets the transfer mode for streaming. [LOW], [HQ], [AVC‑G6], [SHQ (QoS)], [AVC-G (QoS)] ffFactory setting: [HQ] Selects whether to display proxy data recorded information or messages in the viewfinder and LCD monitor. [ON]: Displays proxy recording information and SD memory card remaining capacity at the start of recording. Warning information is displayed at all times. [OFF]: Displays proxy and SD memory card warning information for only three seconds when warning occurs. ffFactory setting: [OFF] Sets the maximum bitrate for video data when the QoS is operating. This setting is used when the streaming distribution is started from the operation of the camera. This can be set when [CAMERA] is selected in the main menu → [NETWORK SETUP] → [STREAMING SETTING] → [START TRIGGER]. [256Kbps], [512Kbps], [1Mbps], [1.5Mbps], [2.5Mbps], [3.5Mbps], [6Mbps], [9Mbps] ffFactory setting: [9Mbps] [9Mbps] cannot be selected when [STREAMING MODE] is set to [SHQ (QoS)]. Sets the minimum bitrate for video data when the QoS is operating. This setting is used when the streaming distribution is started from the operation of the camera. This can be set when [CAMERA] is selected in the main menu → [NETWORK SETUP] → [STREAMING SETTING] → [START TRIGGER]. [256Kbps], [512Kbps], [1Mbps], [1.5Mbps], [2.5Mbps], [3.5Mbps], [6Mbps], [9Mbps] ffFactory setting: [256Kbps] Sets the delay mode during the streaming distribution. This setting is used when the streaming distribution is started from the operation of the camera. This can be set when [CAMERA] is selected in the main menu → [NETWORK SETUP] → [STREAMING SETTING] → [START TRIGGER]. [NORMAL]: Sets if you want to emphasize the stability of streaming. [SHORT]: Sets if you want to emphasize the reduction of streaming delay. ffFactory setting: [NORMAL] ffFor details on relations between dual codec recording and system mode, refer to "System modes and recording functions" (page 76). Recording modes and recording signals (video/audio) The following settings are available only when the main recording is set to [1080‑59.94i], [1080‑50i], [720‑59.94P], or [720‑50P] in the main menu → [SYSTEM MODE] → [LINE&FREQ]. rr Video Recording mode [AVC-G6 2CH MOV] [SHQ 2CH MOV] [HQ 2CH MOV] File format MOV MOV MOV Resolution 1920×1080 *1 1280×720 *2 960×540 640×360 Codec H.264 High Profile H.264 High Profile H.264 High Profile Frame rate 30 fps/25 fps 60 fps/50 fps 30 fps/25 fps/24 fps 30 fps/25 fps 30 fps/25 fps Bitrate 6 Mbps 3 Mbps 3500 kbps 1500 kbps - 85 -