Pentax ZX-60 ZX-60 Manual - Page 16
Avaching
View all Pentax ZX-60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
AVACHING THE LENS lislessaag-27-mAr.bria: 1Remove the body mount cap C) and rear lens cap Q. 2 Align the red dots on the lens and camera while mounting the lens to the camera body, then turn the lens clockwise until it clicks in place. 3 To remove the front lens cap, squeeze the tabs on both sides in the direction of the arrow. 4 To remove the lens, holds down the lens unlock button and turn the lens counterclockwise. Ofn MEMO • The body mount cap is designed to protect the camera against scratches and dust at the factory. For storage, the optional accessory "Body Mount Cap K" is available. k• After mounting the lens, try to turn the lens counterclockwise to make sure it is locked in place. • The camera body and lens mount incorporate lens information contacts and an AF coupler. Dirt, dust, or corrosion may cause damage to the electrical system. Clean the contacts with a soft, dry cloth. • We assume no responsibility nor liability for damages resulting from the use of lenses made by other manufacturers. • To protect the lens information contacts and AF coupler of the lens against damage after removal, be sure to place the lens down with the mount side upward.