Pentax ZX-60 ZX-60 Manual - Page 49
OVERVIEW, FLASH, FUNCTION, reduction, flash, function, Trailing, Shutter, Curtain, Flash, Multi,
View all Pentax ZX-60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
ll 71strottoistetote savil,Atwormtmmalszv..zlesa,-.-,.-.L.-zinx• OVERVIEW OF FLASH FUNCTION .O6•Ma • The AF500FTZ can be connected directly to the Extension cord F5P without Off-camera shoe adapter. • The AF400T flash cannot be used with the built-in flash simultaneously because the 4P sync cord B from the AF400T will interrupt the function of the built-in flash. Red-eye reduction flash function The red-eye reduction flash function with an external flash attached can also be used depending on what type of an external flash is attached, and it may have any restrictions for usage. See page 77 for more details. The red-eye reduction flash function can be used only when the external flash is set to the TTL Auto Mode. Trailing-Shutter-Curtain Sync Flash When using the built-in flash and the external flash simultaneously, the trailing-shutter-curtain-flash function for the built-in flash also operates when the external flash is set to the trailing-shutter-curtain flash function. Before shooting, confirm that both flash units are fully charged. Multi-burst flash with the Pentax dedicated flash When discharging more than 2 Pentax dedicated flashes, make sure that they are of the same type, combine the type B with Type C or Type D with Type E. Refer to the overview of Flash Function on page 90. The built-in flash can be operated with any type of Pentax TTL dedicated flash unit. 2. Contrast-Control-Sync Flash Using the dedicated external flash in combination with the built-in flash allows twin flash photography (contrast-control-synch flash photography). This is based on the difference between the amounts of light discharged from two units. Contrast control synch flash is possible with the combination of following flash units: AF360FGZ, AF330FTZ, AF500FTZ and the built-in flash 1. Place the flash unit a part from the camera. 2. Depress the flash pop up button to activate the built-in flash. 3. Set the flash synch mode to the Contrast-Control-Synch mode. 4. Ensure that both flash units are fully charged and then depress the shutter button to take a picture. etr . MEMO • The ratio of the amount of flashlight is 1 (built-in flash): 2 (dedicated flash unit). • Do not combine an accessory with a different number of contacts such as a "Hot Shoe Grip" as a malfunction may occur. • In the Contrast-Control-Sync Flash Mode, the faster flash sync speed is 1/60 of second. • ,,,,:\N-N•Eck•iwavo•-4. •