Pfaff performance 2054 Owner's Manual - Page 103
edge/piping/beading
View all Pfaff performance 2054 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
'I Knit-Edge/Piping/Beading Foot Stitch: 36 Stitch length: 6.0 Tension: 3-5 Knit edge/piping/beading foot Thick seams in knitted fabrics or imitation furs can be sewn easi with the knit edge foot. In order to obtain a perfect seam on kr fabrics (e.g. shoulder seams), we recommend sewing over a cor ribbon, pulled slightly taut into the seam. This will give the sear additional strength and keep it from stretching out of shape. Piping is easily inserted into a seam. Place the corded edge of t piping in the groove of the foot on the right side of one layer c fabric. Use a straight stitch moving the needle position to be cI to the corded edge. Baste using a long stitch length. Layer on top, your second piece of fabric with right sides together. PlacE the corded edge into the groove of the foot and stitch on top slightly to the right of the previously stitch line. Turn and press 820216-096 For beading, place beads into groove. Note: Do not use beads larger than 4mm. Use a zigzag stitch 1 mm larger than the be and stitch over the beads. r"' Ruffier Attachment Stftch 1 Stftch iength: 3 Tension: 35 Ruffle r With the ruffler you can make closely or widely spaced pleats automatically while sewing, This is very useful for ruffles, linen home decorating, etc. The ruffler can be used in three different ways: 1. Folding and securing pleats in fabric. 2. Folding pleats in fabric and securing to a second fabric in ot operation. 3. Folding pleats in fabric, attaching lace and securing to anot fabric in one operation. When you buy the ruffler from your PFAFF dealer, complete instructions are included. 820255 096