Pfaff performance 2054 Owner's Manual - Page 29
Changing, need'e, Threading
View all Pfaff performance 2054 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Changing the need'e Turn off the machine. To remove: Lower the presser foot and set the needle to its highest position. Loosen the needie screw and pull the needle out BA downwards. To insert: The flat side A of the needle must face to the rear. Lower the presser foot and insert the needle, pushing it up as far as it will go. Hold the needle and tighten the needle screw firmly. F ii F F F F F F Threading the twin need'e Replace the sewing needle with a twin needle. Insert the second spool pin and place one spool of thread on each of the spool pins. When threading make sure to pass one thread to the left and one thread to the right side of tension disk E. Continue threading in the usual manner, making sure the threads do not twist together. Pull one thread into thread the needles. the right guide and one in the left thread guide above the needle, and Note: It is not possible to use the Integrated Needle Threader with a twin needle.