Pioneer AVIC N4 Owner's Manual - Page 135

AV Operating the Picture Adjustment Chapter 8 Customizing the AV Source Setting ❒ When video is viewed in a wide screen mode that does not match its original aspect ratio, it may appear differently. ❒ Remember that use of this system for commercial or public viewing purposes may constitute an infringement on the author's rights protected by the Copyright Law. ❒ Video will appear grainy when viewed in Cinema or Zoom mode. ❒ The navigation map and the rear view camera picture is always Full. Operating the Picture Adjustment • For safety reasons, you cannot use some of these navigation functions while your vehicle is in motion. To enable these functions, you must stop in a safe place and apply the parking brake (see page 13 for details). 1 Touch "V.Adjust" in the System menu. 2 Select the desired item you want to adjust. • Camera - Switch to the picture adjust- ment display for the rear view camera • Source - Switch to the picture adjust- ment display for the AV source screen • Map - Switch to the picture adjustment display for the map screen ❒ When the display is already on the screen, a message to that effect appears. Brightness - Adjust the black intensity Contrast - Adjust the contrast Color - Adjust the color saturation Hue - Adjust the tone of color (red is emphasized or green is emphasized) Dimmer - Adjust the brightness of display ❒ The adjustments of Brightness, Contrast and Dimmer are stored separately when your vehicle's headlights are off (daytime) and when your vehicle's headlight are on (nighttime). These are switched automatically depending on the vehicle's headlights are on or off. ❒ You cannot adjust Color and Hue for the source without a video and navigation map display. ❒ If you select "Source", sources without video and sources with video are saved separately in the memory. ❒ The picture adjustment may not be able to be used with some rear view cameras. ❒ The same setting is selected for the normal background picture and the navigation map display. ❒ Because of the LCD screen characteristics, you may not be able to adjust the screen at low temperatures. 3 Touch "+" or "-" to adjust the selected item. Each time you touch "+" or "-" increases or decreases the level of selected item. +24 to -24 is displayed as the level is increased or decreased. ❒ Dimmer can be adjusted in the range of +1 to +48. 4 Touch "ESC" to return to the previous screen. Switching the backlight On/Off By turning off the backlight of the LCD screen, you can turn off the screen display without turning off the voice guidance. 1 Touch "Screen Off" in the System menu. The backlight turns off, and the screen turns off. ❒ To turn on the backlight, touch the screen again or press the MAP button. 133