Pioneer AVIC N4 Owner's Manual - Page 152
Problems in the AV screen during DVD-Video playback
UPC - 012562863078
View all Pioneer AVIC N4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
NAVI/AV Appendix When the screen is frozen... Park your vehicle in a safe place, and cut off the engine. Turn the ignition key back to "Acc off". Then start the engine again, and turn the power to the navigation system back on. If this does not solve the problem, press the RESET button on the navigation system. Symptom Playback is not possible. There's no picture. The audio and video skip. Rear display picture disappears. Cause The disc is dirty. The loaded disc is a type your navigation system cannot play. A non-compatible video system disc is loaded. The parking brake cord is not connected. The parking brake is not applied. The navigation system is not firmly secured. The source disc being listened to in the navigation system has been ejected. There was a problem with the rear display or a faulty wiring connection. The source without a video is selected. Action (See) Clean disc. Check what type the disc is. Change to a disc compatible to your video system. Connect the parking brake cord, and apply the parking brake. Connect the parking brake cord, and apply the parking brake. Secure the navigation system firmly. Before ejecting the disc, switch the source. This problem may occur when certain connection methods are used. Check the rear display and its connection. Switch the source with a video. Problems in the AV screen (during DVD-Video playback) Symptom CD or DVD playback is not possible. No picture. The audio skips. "Rear display" picture disappears. Cause The disc is inserted upside down. The disc is dirty. The disc is cracked or otherwise damaged. The files on the "CD (DVD)" are an irregular file format. The "CD (DVD)" format cannot be played back. The loaded disc is a type this system cannot play. The parking brake lead is not connected or applied. Parking brake interlock is activated. The "AV1 Input" or "AV2 Input" setting is incorrect. The navigation system is not firmly secured. There was a problem with the "Rear display" or a faulty wiring connection, for example. Action (See) Insert the disc with the label upward. Clean disc. Insert a normal, round disc. Check the file format. Replace disc. Check what type the disc is. ( Also see "Handling and Care of the Disc" for more cautions about handling each type of media.) Connect a parking brake lead correctly, and apply the parking brake. Park your vehicle in a safe place and apply the parking brake. ➲ "Parking brake interlock" ➞ Page 13 Please read the following page and set the setting correctly. ➞ Page 131 Secure the navigation system firmly. Check the "Rear display" and its connection. 150