Pioneer DV-AX10 Owner's Manual - Page 31

Adjusting Audio and Video Settings Setting Analog Audio Connections to an AV Amplifier or Receiver 1 Audio2 Video Language General Audio DRC - Off Audio Out 2 Channel Speaker Setting 5.1 Channel Gain Setting - Fix Hybrid SACD - SACD CD Digital Direct - Off Pure Audio Clock - Off Move SETUP Exit This player is capable of both 2 channel stereo and 5.1 multichannel surround sound audio output. Use this setting to select which analog outputs are connected to an AV component. Settings: 2 Channel (Factory Setting) 5.1 Channel Notes • When "5.1 Channel" is selected, the front right (R) and left (L) audio channels are output from the AUDIO OUT FRONT jacks. • If the center or surround components are not recorded on the disc, there will be no output from the CENTER or SURROUND output jacks. This is not a malfunction. Speaker channels can be verified in the Program Format indicators in the display. About source audio output (5.1 CH) When the source input mode has been switched to the "5.1 Channel" mode settings, audio output for each source will be as shown on the following table. AUDIO CONTENTS OUTPUT MODE FRONT L/R AUDIO OUT (5.1CH) CENTER SURROUND L/R SUB WOOFER DOLBY DIGITAL 5.1CH 2CH Front L/R 2CH Downmix *1 L/R Center Surround L/R Mute Mute LFE *2 Mute DOLBY DIGITAL KARAOKE 5.1CH 2CH 2CH Downmix *1 L/R 2CH Downmix *1 L/R Mute Mute Mute Mute Mute Mute LPCM (DVD-Video) 5.1CH 2CH L/R 2CH L/R Mute Mute Mute Mute Mute Mute DVD LPCM (DVD-Audio) 5.1CH 2CH Front L/R 2CH Downmix *1 L/R Center Surround L/R Mute Mute LFE *2 Mute MPEG 5.1CH 2CH L/R Center Surround L/R LFE *2 L/R Mute Mute Mute DTS 5.1CH 2CH Front L/R 2CH Downmix *1 L/R Center Surround L/R Mute Mute LFE *2 Mute SACD, CD 5.1/2CH L/R Mute Mute Mute VIDEO CD 5.1/2CH L/R Mute Mute Mute *1 Some DVD-Audio discs prohibit downmixing of the audio signal, and the audio will not be downmixed even if the setting is set to "2 Channel". *2 Low Frequency Effect. ADJUSTING AUDIO AND VIDEO SETTINGS 31 En