Samsung SRD-470D User Manual - Page 18
Connecting The Alarm Input/output, Connecting The Rs485 Device
View all Samsung SRD-470D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
connecting with other device CONNECTING THE ALARM INPUT/OUTPUT Connecting the alarm input signal Connection port for the alarm input signal. Connect one strand of the sensor signal line (two strands) to the alarm input port and connect the other to the [G] port. Connecting the alarm output signal Connection port for the alarm output signal. Connect one strand of the sensor signal line (two strands) to the alarm output port and connect the other to the [COM] port. CONNECTING THE RS485 DEVICE Connect the rear [RS485 +, -] ports to the external device. M You can connect and control the PTZ camera which supports the RS485 communication. Check if the RS485 device is compatible with the product first. Pay attention not to change the polarity (+/-) of the RS485 device when connecting it. Depending on camera's type, connection polarity can be different. For further information, refer to the respective PTZ Camera's documentation. ALARM IN ALARM OUT 18_ connecting with other device 34