Samsung SRD-470D User Manual - Page 42
Setting The Device
View all Samsung SRD-470D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
using the DVR SETTING THE DEVICE You can setup Camera, Storage Device, Remote Device, POS Device and Monitor. Camera Setting the Camera You can set Video, Audio, Channel Name and Dwell Time of a Camera. Using the mouse may help make setup easier. 1. Press the [MENU] button on the remote control or front panel. 2. Use the left/right button (◄ ►) to select . Device setting menu is selected. 3. Use the up/down buttons () to move to , and press [ENTER] button. Device Camera Storage Device Remote Device POS Device Monitor Logout Exit 4. Select . You will see a window where you can configure the camera settings including Video, Audio, Channel Name, Dwell Time and Progressive. 5. Use direction buttons to move to a desired item, and set the value. Camera Camera PTZ CH Video Audio CH Name SEQ-Dwell Time Progressive 1 ON OFF CAM 01 5 sec OFF 2 ON OFF CAM 02 5 sec OFF 3 ON OFF CAM 03 5 sec OFF 4 ON OFF CAM 04 5 sec OFF • Video - : You can turn ON/OFF the selected channel's camera. Screen Setup OK Cancel - : Shows information other than the video of the selected channel. For privacy protection, it does not display the video while the recording continues. - : Shows nothing but an empty screen while the recording continues. • Audio - If set to , you can turn the audio of the channel ON/OFF on the Live screen. - If set to , the channel's audio is off on the Live screen and not recorded. Audio output is available for only 1 channel. • CH Name : Up to 15 characters including blanks are allowed. (The first character should not be empty.) Refer to "Using Virtual Keyboard". (Page 34) • SEQ-Dwell Time : You can set the dwell time between channels for the Live screen and Spot Out. If set to , the channel is not listed in the Auto Sequence mode. 42_ using the DVR