Samsung SRD-470D User Manual - Page 45
Formatting, HDD Alarm
View all Samsung SRD-470D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
USING THE DVR Formatting You can format a storage device. Using the mouse may help make setup easier. 1. Use the up/down buttons () in window to move to , and press [ENTER] button. 2. Select . A window for selection of device for formatting appears. 3. Use direction buttons to select a device to be formatted. Storage Device Device Format HDD Alarm Device HDD CD / DVD Select 1 - Used/Total 12.28G/499.37G 0 / 0 Usage Internal Backup Format OK Cancel 4. Select on the bottom of the screen. Press on the "Manage" confirmation window will start formatting the selected device. 5. When the formatting is done, press . Storage Device Device Format HDD Alarm Device Select HDD 1 CD / DVDManage- Used/Total 12.28G/499.37G 0 / 0 Formatting deletes all recordings. Proceed formatting? OK Cancel Format OK Cancel Usage Internal Backup HDD Alarm You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port, and its duration. Using the mouse may help make setup easier. 1. Use the up/down buttons () in window to move to , and press [ENTER] button. 2. Select . A window for setting HDD check and replace output ports and their durations appears. 3. Use direction buttons to move to the desired item. Storage Device Device Format HDD Alarm Check Alarm Output Port 1 2 All Duration OFF BEEP Replace Alarm Output Port 1 2 All Duration OFF BEEP • Alarm - Alarm signal will output through the alarm out port on the rear side when selected , . OK Cancel - If was selected, a beep will sound. - If was selected, both beep sound and alarm signal through rear side ports will output. • Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarm output port. • Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specified alarm output port. English _45