Samsung SRD-470D User Manual - Page 48
Setting the Monitor, Setting Display position
View all Samsung SRD-470D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
using the DVR Monitor You can configure information to be displayed and its format for Spot Out monitor. Setting the Monitor Using the mouse may help make setup easier. 1. Use the up/down buttons () in window to move to , and press [ENTER] button. Monitor Monitor Spot Out Mode 2. Select . 3. Use direction buttons to move to a desired Event Display Display OFF Date Time CH Name Icon item, and set the value. • Event Display : Sets the dwell time of the event channel display on the monitor when an event occurs. VGA 800x600 Sharpness Level1 (Low) If selected , it displays the channel until you Display Position Setup press [ALARM] button to release it. OK Cancel • Display : Displays only checked items on the monitor screen. • VGA : The current monitor may not display the video if the settings do not match with this player • Sharpness : You can adjust the sharpness of the video output signal. 4. When the monitor setup is done, press . Setting Display position Some monitors many not display information (camera name, icon, time information, etc.) about the DVR, depending on the condition. Then, you can change the display position of the data. 1. In the window, press the up/down () button to move to and press the [ENTER] button. 2. Select the item. 3. Select in the bottom. You will move to the window. 2011-01-01 01:10:25 4. Use the four direction buttons or the number buttons on the front panel or the remote control to adjust the data position. Display Position Setup 30 30 30 30 OK Cancel 48_ using the DVR