Samsung SRD-470D User Manual - Page 58
Setting the Protocol - web viewer
View all Samsung SRD-470D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
using the DVR • IP, Gateway, Subnet Mask, and DNS - For : You can directly input IP address, Gateway, Subnet Mask and DNS. - For : IP address, Gateway, and Subnet Mask are set automatically. - For : IP address, Gateway, and Subnet Mask are set automatically. • User ID, Password : In case you selected ADSL, provide the "User ID" and its "Password". Connection Mode Connection Protocol Connection Mode Bandwidth ADSL 600kbps IP Gateway Subnet Mask DNS 192.168. 1.200 192.168. 1. 1 255.255.255. 0 Manual 168.126. 63. 1 User ID Password ID OK Cancel M DNS server for and can be set by user only if you selected . 6. When the connection setup is done, press . Setting the Protocol 1. Use the up/down buttons () in window to move to , and press [ENTER] button. 2. Select . 3. Use direction buttons to move to a desired item, and set the value. Connection Mode Connection Protocol Protocol Type Port(TCP) Port(UDP) Unicast/Multicast Multicast IP TTL Webviewer Port TCP 554 ~ 558 8000 ~ 8160 Unicast 224.126. 63. 1 5 80 • Protocol Type : Select the protocol type between TCP and UDP. If selected UDP, selections of Port (TCP), Port (UDP), and Unicast/ Multicast are activated. OK Cancel If setting the connection mode to ADSL, you cannot select UDP for the protocol type. • Port (TCP) : Initially, is set. It increases / decreases by 5. - TCP: It has better stability and lower speed when compared to UDP, and recommended for internet environments. • Port (UDP) : Initially, is set. It increases / decreases by 160. - UDP : It has less stability and faster speed when compared to TCP, and recommended for local area network (LAN) environments. • Unicast/Multicast : Select one between Unicast and Multicast. If selected Multicast, Multicast IP and TTL are activated. - Unicast : Transfers data (UDP, TCP) individually to each connecting client. - Multicast : Multiple client can receive the data (only in UDP) without putting additional traffic load to the network. • Multicast IP : User can directly input. • TTL : Select from 0 ~ 255. Initial value for the TTL is set to . • Webviewer Port : Enter the port number for the Web Viewer. Initially, it is set to . 4. When the protocol setup is done, press . 58_ using the DVR