Sharp DX-B352P DX-B352P User Manual - Page 3
Safety Precautions
View all Sharp DX-B352P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Safety Precautions Laser Safety The laser radiation is harmful to the human body. Since laser components are completely sealed in the printer, laser radiation will not leak. To avoid laser radiation, please do not randomly disassemble the printer! The printer follows the provisions of Class 1 laser products under CFR standard. The printer has a Class III b laser diode, which has no laser radiation leakage among laser components. The laser components shall comply with the requirements of U.S. Code of Federal Regulations, 21 CFR 1040, IEC 60825-1. The following label is attached to the laser components inside the printer: Reclamation and recycling To protect the environment, our corporation has already established the system of reclamation and recycling for waste products. Please refer to the SHARP official website for product recovery at www.sharpusa.com. Safety Warning Please note the following safety warnings before using the printer: There is high-voltage electrode inside the printer. Before cleaning the printer, make sure the power is turned off! Plugging and unplugging the power cord plug with a wet hand can result in an electric shock. The fuser unit is hot during and after printing. Touching the fuser unit (the shaded area as shown) may cause burns! The fuser unit is attached with a high temperature warning label. Please do not remove or damage this label. II