Sharp DX-B352P DX-B352P User Manual - Page 51
Control Panel Settings
View all Sharp DX-B352P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Manual Setting Enter the IP address in the Web browser's address bar to open the embedded Web server. 1. Click Settings in the navigation bar to open the Settings page; 2. Select Network Settings - IPv4 Settings; 3. Set IP Address Assignment Mode (Manual), IP Address and Subnet Mask. Other items are optional; 4. Click Apply to save the settings. Note: • You can use the embedded Web server to change the IP Address Assignment Mode into Automatic or Manual. • To reset all the parameter settings of the printer, users can restore to the factory settings, and please refer to Chapter 6 for the specific operations. 4.3.2. Control Panel Settings Users can set up the wired network and wireless network through the Control Panel menu. 4.3.2.1. Network Settings Users can set the network status through Network Settings. 1) Press "Menu" to enter the Menu Settings interface. 2) Press the direction key "▲" or "▼" to select the "3. Network Set" option and press "OK". 3) Press the direction key "▲" or "▼" to select the "1. Wired Config" and press "OK"; Press direction key "▲" or "▼" to select "1. IPv4" or "2. IPv6". 43