Sharp GX30 Service Manual - Page 24
Checking the value of SUM
View all Sharp GX30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
GX30 CONFIDENTIAL 5) Checking the value of SUM When the rewrite operation is completed, a confirmation message appears with SUM. SUM also appears on handset. After 8 seconds, SUM disappears. When SET POWER SW is turned off, SUM disappears. Figure 39 Flash Loader 5.02 SUM Check End SUM = 0xdb3d Figure 40 Make sure SUM is the same between the PC and handset. The same SUM means that the rewrite operation is completed properly. If the value is different, try again to ensure completion of the operation. If the MOT file rewrite operation fails, an error message appears on handset. * The screen shot on the left shows an error in erasing Flash data. "ADR" and "STR" appear only when an error occurs in the FLASH-related operation. Start over the MOT file rewrite operation. Find the message in [4.4.3.2) Error messages for Loading loader (see page 2-18)], and follow the instructions. Error screen Flash Loader 5.02 FLASH_ERROR ERROR_ERASE ADR = 0x1000000 STR = 0xA0 Figure 41 2 - 16