Sharp GX30 Service Manual - Page 80
[2] Disassembly and reassembly, REMOVAL, PROCEDURE
View all Sharp GX30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
GX30 [2] Disassembly and reassembly CONFIDENTIAL • To reassemble, follow the reverse procedure. STEP REMOVAL 1 Back Cabinet (Key) Ass'y PROCEDURE 1.Battery Cover........ (A1)x1 2.Li-Ion Battery......... (A2)x1 3.Screw Cover.......... (A3)x2 4.Screw A4)x4 5.Hook A5)x4 6.Hook A6)x1 FIGURE 1 2 Back Cabinet (Key) Assembly (B1) x 1 2 SD Card Cover 1.Stoper B1)x1 3 Belt 2.Hook B2)x4 3 Aerial 1.Aerial Cover.......... (C1)x1 4 2.Hook C2)x1 SD Card Cover Unit Open the SD card cover and turn it as indicated by the arrow to release the stopper. Then pull out the cover downward. Remove the SD cover belt as instructed below. SD Card Cover (A1) x 1 1 SD Card Cover Belt (A4) x 2 1.7 x 5 mm (A2) x 1 (A3) x 2 (A4) x 2 1.7 x 5 mm PUSH (B2) x 4 2 3 PULL External Connector Cover Back Cabinet (Key) Assembly Figure 1 (A5) x 2 2 SLIDE Back Cabinet (Key) Assembly (A6) x 1 3 SWING 1 UP (A5) x 2 2 SLIDE Jig Front Cabinet (Key) (Use something flat and hard, for example guitar picks.) 1 Remove the external connector cover. Insert a jig into the slot and slightly lift up the back cabinet (key) assembly. 2 Insert jigs into the space. Slide jigs on the both sides to release 4 hooks (A5). 3 Move the cabinet assembly gently from side to side to release the other hook (A6). Figure 2 4 (C1) x 1 Figure 3 Aerial 1 PUSH Back Cabinet (Key) Assembly Figure 4 2 PULL (C2) x 1 3 - 4