Sharp GX30 Service Manual - Page 28
Default setting for the program., When the Auto Dial check
View all Sharp GX30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
GX30 4.5.2 Default setting for the program. • Activate the program and set defaults. CONFIDENTIAL 1) Select the COM port. 2) Set the GPIB No. 3) Select the test instrument. 4) Set the GPIB address. Figure 44 5) Set the "Cable Offset" values. For cables with connector QCNWK0138AFZZ/ QCNWK0136AFZZ, set the values as follows: GSM 900: 0.60 DCS 1800: 0.95 PCS 1900: 0.96 GSM 850: 0.60 6) Auto Dial Setting When the Auto Dial check box is checked, an entered number is automatically dialed for performance check. 7) Number Setting Enter a number for Auto Dial. 2 - 20
GX30
2 – 20
CONFIDENTIAL
4.5.2 Default setting for the program.
•
Activate the program and set defaults.
Figure 44
1) Select the COM port.
2) Set the GPIB No.
3) Select the test instrument.
4) Set the GPIB address.
5) Set the "Cable Offset" values.
GSM 900: 0.60
DCS 1800: 0.95
PCS 1900: 0.96
GSM 850: 0.60
For cables with connector
QCNWK0138AFZZ/
QCNWK0136AFZZ, set the
values as follows:
6) Auto Dial Setting
When the Auto Dial check
box is checked, an entered
number is automatically
dialed for performance
check.
7) Number Setting
Enter a number for Auto Dial.