Sharp XEA21S Instruction Manual - Page 74
Removing the paper roll, Caution: The paper cutter is mounted on the printer cover. - parts
UPC - 074000049260
View all Sharp XEA21S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Removing the paper roll When a red dye appears on the paper roll, it is time to replace it. Replace the paper roll with a new one. If you plan on not using the register for an extended period of time, remove the paper roll, and store it in an appropriate place. Caution: The paper cutter is mounted on the printer cover. Be careful not to cut yourself. When not using the take-up spool (using as receipt paper): Print roller arm 1. Remove the printer cover. 2. Lift up the print roller release lever to unlock and open the print roller arm. 3. Remove the paper roll from the paper roll cradle. Do not pull the paper through the printer. Print roller release lever When using the take-up spool (using as journal paper): Area to cut 1. Turn the mode switch to a position other than OFF with the power cord connected. 2. Remove the printer cover. F 3. Press the key to advance the journal paper until its printed part is out of the way. 4. Cut the paper and remove the take-up spool. 5. Lift up the print roller release lever to unlock and open the print roller arm. 6. Remove the paper roll from the paper roll cradle. Do not pull the paper through the printer. 7. Remove the outer side of the take-up spool as shown on the left. 8. Remove the printed journal roll from the take-up spool. Installing the paper roll Caution: The paper cutter is mounted on the printer cover. Be careful not to cut yourself. Installing the receipt paper roll: Paper positioning guides 72 1. Turn the mode switch to a position other than OFF with the power cord connected. 2. Remove the printer cover. 3. Lift up the print roller release lever to unlock and open the print roller arm. 4. Set the paper correctly in the paper roll cradle. 5. Feed the end of the paper along with the paper positioning guides.