Sony DCR-DVD710 Operating Guide - Page 62

Dubbing movies to VCR or DVD/HDD recorders Connecting a device with the A/V connecting cable You can dub movies played back on your camcorder to other recording devices, such as VCRs or DVD/HDD recorders. Connect the device in either of the following ways. Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for this operation (p. 21). Refer also to the instruction manuals supplied with the devices to be connected. b Notes • Since dubbing is performed via analog data transfer, the image quality may deteriorate. Device without S VIDEO jack IN Device with S VIDEO jack IN S VIDEO VIDEO (Yellow) VIDEO A/V Remote Connector (White) AUDIO (Red) (White) AUDIO (Red) : Video/Signal flow A A/V connecting cable (supplied) Connect to the input jack of the other device. B A/V connecting cable with S VIDEO (optional) When connecting to the other device via the S VIDEO jack, by using an A/V connecting cable with S VIDEO (optional), higher quality movies can be produced than with an A/V connecting 62 VCRs or DVD/HDD recorders cable. Connect the white and red plugs (left/right audio) and the S VIDEO plug (S VIDEO channel) of the A/V connecting cable with S VIDEO (optional). The yellow plug connection is not necessary. Connecting only the S VIDEO plug will not output audio. b Notes • To hide the screen indicators, such as a counter on the screen of the monitor device connected,