Sony DCR-TRV480E User Manual - Page 119

Recording

Get Sony DCR-TRV480E PDF manuals and user guides View all Sony DCR-TRV480E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 119 highlights

Recording Troubleshooting If you are using a "Memory Stick" for recording, refer also to the "Memory Stick" section. (p. 121) Symptom Cause and/or Corrective Actions The tape does not start when you press REC START/STOP. cSlide the POWER switch to turn on the CAMERA-TAPE lamp. (p. 17) cThe tape has reached the end. Rewind it, or insert a new cassette. cSet the write-protect tab to REC or insert a new cassette. (p. 135) cThe tape is stuck to the drum due to moisture condensation. Remove the cassette and leave your camcorder for at least 1 hour, then re-insert the cassette. (p. 140) The power abruptly turns off. • [A.SHUT OFF] in the (STANDARD SET) menu is set to [5 min]. (p. 82) cWhen approximately 5 minutes have elapsed while you do not operate your camcorder, the camcorder is automatically turned off. Slide the POWER switch down to turn the power on again. (p. 17) Or use the AC Adaptor. cCharge the battery pack. (p. 14) The SteadyShot does not function. cSet [STEADYSHOT] to [ON] in the (CAMERA SET) menu. (p. 65) cSet [16:9 WIDE] to [OFF] in the (CAMERA SET) menu. (p. 65) The auto focus does not function. cSet [FOCUS] to [AUTO] in the (CAMERA SET) menu to enable auto focus. (p. 39) cThe recording conditions are not suitable for auto focus. Adjust the focus manually. (p. 39) A vertical band appears when • This occurs when the contrast between the subject and the background is recording candlelight or electric light too high. This is not a malfunction. in the dark. A vertical band appears when recording a bright subject. • This phenomenon is called the smear effect. This is not a malfunction. Tiny spots in white, red, blue, or green appear on the screen. • The spots appear when you are recording in [SLOW SHUTTR], Super NightShot plus, or Color Slow Shutter. This is not a malfunction. (p. 37, 42) The color of the picture is not correctly displayed. cDeactivate the NightShot plus function. (p. 37) Picture appears too bright on the screen, and the subject does not appear on the screen. cDeactivate the NightShot plus function in bright places. (p. 37) cCancel the back light function. (p. 35) The shutter sound is not heard. cSet [BEEP] to [MELODY] or [NORMAL] on the SET) menu. (p. 81) (STANDARD Black bands appear when you record cSet [STEADYSHOT] to [OFF] on the a TV screen or computer screen. (p. 65) (CAMERA SET) menu. Flickering or changes in color occurs. cThis occurs when recording pictures under a fluorescent lamp, sodium lamp, or mercury lamp in the soft portrait or sports lesson mode. Cancel [PROGRAM AE] in this case. (p. 62) END SEARCH does not work. • The cassette was ejected after recording. • The cassette is new and has nothing recorded. ,continued Troubleshooting 119

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
Troubleshooting
Troubleshooting
119
Recording
If you are using a “Memory Stick” for recording, refer also to the “Memory Stick” section. (p. 121)
Symptom
Cause and/or Corrective Actions
The tape does not start when you
press REC START/STOP.
c
Slide the POWER switch to turn on the CAMERA-TAPE lamp. (p. 17)
c
The tape has reached the end. Rewind it, or insert a new cassette.
c
Set the write-protect tab to REC or insert a new cassette. (p. 135)
c
The tape is stuck to the drum due to moisture condensation. Remove the
cassette and leave your camcorder for at least 1 hour, then re-insert the
cassette. (p. 140)
The power abruptly turns off.
•
[A.SHUT OFF] in the
(STANDARD SET) menu is set to [5 min].
(p. 82)
c
When approximately 5 minutes have elapsed while you do not operate
your camcorder, the camcorder is automatically turned off.
Slide the POWER switch down to turn the power on again. (p. 17) Or
use the AC Adaptor.
c
Charge the battery pack. (p. 14)
The SteadyShot does not function.
c
Set [STEADYSHOT] to [ON] in the
(CAMERA SET) menu. (p. 65)
c
Set [16:9 WIDE] to [OFF] in the
(CAMERA SET) menu. (p. 65)
The auto focus does not function.
c
Set [FOCUS] to [AUTO] in the
(CAMERA SET) menu to enable
auto focus. (p. 39)
c
The recording conditions are not suitable for auto focus. Adjust the focus
manually. (p. 39)
A vertical band appears when
recording candlelight or electric light
in the dark.
•
This occurs when the contrast between the subject and the background is
too high. This is not a malfunction.
A vertical band appears when
recording a bright subject.
•
This phenomenon is called the smear effect. This is not a malfunction.
Tiny spots in white, red, blue, or
green appear on the screen.
•
The spots appear when you are recording in [SLOW SHUTTR], Super
NightShot plus, or Color Slow Shutter. This is not a malfunction.
(p. 37, 42)
The color of the picture is not
correctly displayed.
c
Deactivate the NightShot plus function. (p. 37)
Picture appears too bright on the
screen, and the subject does not
appear on the screen.
c
Deactivate the NightShot plus function in bright places. (p. 37)
c
Cancel the back light function. (p. 35)
The shutter sound is not heard.
c
Set [BEEP] to [MELODY] or [NORMAL] on the
(STANDARD
SET) menu. (p. 81)
Black bands appear when you record
a TV screen or computer screen.
c
Set [STEADYSHOT] to [OFF] on the
(CAMERA SET) menu.
(p. 65)
Flickering or changes in color occurs.
c
This occurs when recording pictures under a fluorescent lamp, sodium
lamp, or mercury lamp in the soft portrait or sports lesson mode. Cancel
[PROGRAM AE] in this case. (p. 62)
END SEARCH does not work.
•
The cassette was ejected after recording.
•
The cassette is new and has nothing recorded.
,
continued