Sony DCR-TRV480E User Manual - Page 81
REMAINING, REMOTE CTRL, REC LAMP, Using the Menu
View all Sony DCR-TRV480E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Using the Menu REMAINING GAUTO ON REMOTE CTRL Select to display the remaining tape indicator for about 8 seconds: • After you select the CAMERA-TAPE mode with the cassette inserted, and your camcorder calculates the remaining amount of tape. • When you touch (play/pause). Select to always display the remaining tape indicator. GON OFF Select when using the Remote Commander supplied with your camcorder. Select to deactivate the Remote Commander to prevent your camcorder from responding to a command sent by another VCR remote control unit. b Note • The setting returns to [ON] when you have the power source disconnected from your camcorder for more than 5 minutes. REC LAMP GON OFF BEEP Select to turn on the camera recording lamp on the front of your camcorder during recording. Select this setting in the following recording situations. The camera recording lamp will not light up during recording. • When you do not want the subject to be nervous about being recorded. • When you are recording close to the subject. • When the subject reflects the recording lamp. GMELODY NORMAL OFF Select to sound a melody when you start/stop recording, operate the touch panel, or when an unusual condition occurs on your camcorder. Select to sound a beep instead of the melody. Select to cancel the melody, the beep sound, the shutter sound or touch panel operation confirmation beep. ,continued Using the Menu 81