TEAC w-865r Owners Manual - Page 12
Playback either TAPE I or TAPE II 2
View all TEAC w-865r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Playback (either TAPE I or TAPE II) 2 BDC BDC D Tape counter Press the CLEAR I or II button to reset the tape counter to 0000. You can use this function for easy relocation of any desired point on the tape. A AE F A To stop playback Press the stop button (H). SYNC REV BLANK SCAN REC PARALLEL REC HIGH DUB PLAY NORM DUB PLAY B To stop playback temporarily Press the PAUSE button. To resume playback, press the PAUSE button again, or press the play button (h or y). E Pitch control (TAPE I deck only) This control varies the pitch of the music during playback. (This control does not work during recording or dubbing.) < While playback is paused, pressing the play button whose direction is opposite to the indicator (h or y) on the display, will switch the playback direction. This does not release the pause function. Press PAUSE or the same play button (h or y) again to start playback on the other side of the tape. C Fast forward/Rewind Press the m or , button while in stop mode to fast wind the tape. To stop the fast winding tape, press the stop button (H). Turning the pitch control knob clockwise increases the playback speed and raises the pitch up to +10%. Turning the pitch control knob counterclockwise reduces the playback speed and lowers the pitch by a maximum of -10%. F To listen through headphones Plug your headphones into the PHONES jack, and put on the headphones. Plugging into the PHONES jack does not disable the line outputs. CAUTION There is no level control for the headphones output. Beware that sudden loud sounds may occur depending on recorded material. You should avoid prolonged exposure to high volume sound as this can damage your hearing. 12