TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 Configuration Guide - Page 152

Managing MAC Address Table Address Configurations Step 3 Step 4 end Return to privileged EXEC mode. copy running-config startup-config Save the settings in the configuration file. Note: • In the same VLAN, once an address is configured as a static address, it cannot be set as a filter- ing address, and vice versa. • Multicast or broadcast addresses cannot be set as static addresses. • Ports in LAGs (Link Aggregation Group) are not supported for static address configuration. The following example shows how to add a static MAC address entry with MAC address 00:02:58:4f:6c:23, VLAN 10 and port 1. When a packet is received in VLAN 10 with this address as its destination, the packet will be forwarded only to port 1. Switch#configure Switch(config)# mac address-table static 00:02:58:4f:6c:23 vid 10 interface fastEthernet 1/0/1 Switch(config)#show mac address-table static MAC Address Table MAC VLAN Port Type Aging 00:02:58:4f:6c:23 10 Fa1/0/1 config static no-aging Total MAC Addresses for this criterion: 1 Switch(config)#end Switch#copy running-config startup-config 2.2.2 Modifying the Aging Time of Dynamic Address Entries Follow these steps to modify the aging time of dynamic address entries: Step 1 configure Enter global configuration mode. Configuration Guide 131