TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 Configuration Guide - Page 56

Managing System System Info Configurations Step 3 smonth: Enter the start month of Daylight Saving Time. There are 12 values showing as follows: Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec. sday: Enter the start day of Daylight Saving Time, which ranges from 1 to 31. stime: Enter the start time of Daylight Saving Time,in the format of HH:MM. syear: Enter the start year of Daylight Saving Time. emonth: Enter the end month of Daylight Saving Time. There are 12 values showing as follows: Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec. eday: Enter the end day of Daylight Saving Time, which ranges from 1 to 31. etime: Enter the end time of Daylight Saving Time,in the format of HH:MM. eyear: Enter the end year of Daylight Saving Time. offset: Enter the offset of Daylight Saving Time. The default value is 60. show system-time dst Verify the DST information of the switch. Step 4 Step 5 end Return to privileged EXEC mode. copy running-config startup-config Save the settings in the configuration file. The following example shows how to set the Daylight Saving Time by Date Mode. Set the start time as 01:00 August 1st, 2016, set the end time as 01:00 September 1st, 2016 and set the offset as 50. Switch#configure Switch(config)#system-time dst date Aug 1 01:00 2016 Sep 1 01:00 2016 50 Switch(config)#show system-time dst DST starts at 01:00:00 on Aug 1 2016 DST ends at 01:00:00 on Sep 1 2016 DST offset is 50 minutes DST configuration is one-off Switch(config)#end Switch#copy running-config startup-config 2.2.5 Specifying the System IP Note: Before configuring Management VLAN, make sure the VLAN will be set as the management VLAN is configured correctly and at least one port's PVID is set as the management VLAN ID. Configuration Guide 35