TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 Configuration Guide - Page 47

Managing System System Info Configurations Get Time from NTP Server Synchronize with PC's Clock 2) Click Apply. Set the system time by getting time from NTP server. Make sure the NTP server is accessible on your network. If the NTP server is on the Internet, connect the switch to the Internet first. Time Zone: Select your local time zone. Primary Server: Enter the IP Address of the primary NTP server. Secondary Server: Enter the IP Address of the secondary NTP server. Update Rate: Specify the interval the switch fetching time from NTP server, which ranges from 1 to 24 hours. The default value is 12 hours. Synchronize the system time of the switch with PC's clock. 2.1.4 Setting the Daylight Saving Time Choose the menu System > System Info > Daylight Saving Time to load the following page. Figure 2-6 Setting the Daylight Saving Time Follow these steps to configure Daylight Saving Time: 1) In the DST Config section, select Enable to enable the Daylight Saving Time function. 2) Choose one method to set the Daylight Saving Time of the switch and specify the information. Configuration Guide 26