TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 Configuration Guide - Page 398
Switchconfig#mac access-list, Switchconfig-mac-acl#rule
View all TP-Link T1500-28TC TL-SL2428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 398 highlights
Configuring ACL ACL Configurations The following example shows how to create MAC ACL 50 and configure Rule 1 to permit packets with source MAC address 00:34:a2:d4:34:b5: Switch#configure Switch(config)#mac access-list 50 Switch(config-mac-acl)#rule 1 permit smac 00:34:a2:d4:34:b5 smask ff:ff:ff:ff:ff:ff Switch(config-mac-acl)#show access-list 50 mac access list 50 Rule 1 permit smac 00:34:a2:d4:34:b5 smask ff:ff:ff:ff:ff:ff Switch(config-mac-acl)#end Switch#copy running-config startup-config Configuring the Standard-IP ACL Step 1 configure Enter global configuration mode. Step 2 access-list create access-list-num Create a Standard-IP ACL. access-list-num: Enter an ACL ID. The ID ranges from 500 to 1499. Step 3 access-list standard acl-id rule rule-id { deny | permit } [[ sip source-ip ] smask source-ip-mask] [[ dip destination-ip ] dmask destination-ip-mask ] Add a rule to the ACL. acl-id: The ID number of the ACL you have created. rule-id: Specify the rule ID, which ranges from 0 to 1999. It should not be the same as any existing Standard-IP rule IDs deny | permit: Specify the operation to be performed with the packets that match the rule. Deny means to discard; permit means to forward. By default, it is set to permit. source-ip: Enter the source IP address. source-ip-mask: Enter the mask of the source IP address. This is required if a source IP address is entered. destination-ip: Enter the destination IP address. destination-ip-mask: Enter the mask of the destination IP address. This is required if a destination IP address is entered. Step 4 show access-list [access-list-num] (Optional) View the current ACL configuration. access-list-num: The ID number of the ACL. Configuration Guide 377