TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 Configuration Guide - Page 57

Managing System System Info Configurations Follow these steps and choose one method to specify the system IP: Step 1 configure Enter global configuration mode. Step 2 ip management-vlan vlan-id Specify the ID for management VLAN. Only the members belong to the management VLAN can access to the switch. vlan-id: Enter the ID for management VLAN. Step 3 interface vlan vlan-id Enter the Interface Configuration Mode of the management VLAN. vlan-id: Enter the IEEE 802.1Q VLAN ID of the management VLAN, ranging from 1 to 4094. Step 4 Use the following command to specify the network parameters manually. ip address { ip-addr } { ip-mask } [ gateway ] Specify the system lP of the switch manually. ip-addr: Enter the system IP for the switch. By default, it is 192.168.0.1. ip-mask: Enter the subnet mask for the switch. By default, it is 255.255.255.0. gateway: Enter the gateway for the switch. Use the following command to let the switch obtain network parameters from DHCP server or BOOTP server. ip address-alloc { dhcp | bootp } Specify the method how the switch obtains network parameters. dhcp: Select to let the switch obtain network parameters from DHCP server. bootp: Select to let the switch obtain network parameters from BOOTP server. Step 5 end Return to privileged EXEC mode. Step 6 copy running-config startup-config Save the settings in the configuration file. The following example shows how to set the management VLAN as VLAN 2. Set the IP address as 192.168.0.12 and set the subnet mask as 255.255.255.0. Switch#configure Switch(config)#ip management-vlan 2 #2006-01-01 08:08:44,[NETIF]/5/Line protocol on Interface Vlan1, changed state to down by admin on vty0 (192.168.0.100). #2006-01-01 08:09:19,[NETIF]/5/Line protocol on Interface Vlan2, changed state to up. Configuration Guide 36