TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 Configuration Guide - Page 320
Configuring Storm Control, Switchconfig-if#bandwidth ingress
View all TP-Link T1500-28TC TL-SL2428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 320 highlights
Configuring QoS Bandwidth Control Configuration Step 3 Step 4 Step 5 Step 6 bandwidth {[ingress ingress-rate] [egress egress-rate]} Configure the upper rate limit for the port to receive and send packets. ingress-rate: Configure the upper rate limit for receiving packets on the port. The valid values are from 1 to 1000000 Kbps. egress-rate: Configure the upper rate limit for sending packets on the port. The valid values are from 1 to 1000000 Kbps. show bandwidth interface [fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range gigabitEthernet port-list] Verify the ingress/egress rate limit for forwarding packets on the port. If no port is specified, it displays the upper ingress/egress rate limit for all ports. end Return to privileged EXEC mode. copy running-config startup-config Save the settings in the configuration file. The following example shows how to configure the ingress-rate as 5120 Kbps and egressrate as 1024 Kbps for port 1/0/5: Switch#configure Switch(config)#interface fastEthernet 1/0/5 Switch(config-if)#bandwidth ingress 5120 egress 1024 Switch(config-if)#show bandwidth interface fastEthernet 1/0/5 Port IngressRate(Kbps) EgressRate(Kbps) LAG --------- Fa1/0/5 5120 1024 N/A Switch(config-if)#end Switch#copy running-config startup-config 3.2.2 Configuring Storm Control Configure the upper rate limit on the port for forwarding broadcast packets, multicast packets and unknown unicast frames. Step 1 Step 2 configure Enter global configuration mode interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range gigabitEthernet port-list} Enter interface configuration mode. Configuration Guide 299