TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 Configuration Guide - Page 490

Configuring Network Security Figure 8-16 Network Topology Configuration Examples Management Network Administrator Switch RADIUS Server 1 192.168.0.10/24 Auth Port:1812 RADIUS Server 2 192.168.0.20/24 Auth Port: 1812 8.3.2 Configuration Scheme To implement this requirement, the senior administrator can create the login account and the Enable password on the two RADIUS servers, and configure the AAA feature on the switch. The IP addresses of the two RADIUS servers are 192.168.0.10/24 and 192.168.0.20/24; the authentication port number is 1812; the shared key is 123456. The overview of configuration on the switch is as follows: 1) Globally enable AAA. 1) Add the two RADIUS servers on the switch. 2) Create a new RADIUS server group and add the two servers to the group. Make sure that RADIUS Server 1 is the first server for authentication. 3) Configure the method list. 4) Configure the AAA application list. Demonstrated with T1500-28PCT, the following sections provide configuration procedure in two ways: using the GUI and using the CLI. 8.3.3 Using the GUI 1) Choose the menu Network Security > AAA > Global Config to load the following page. In the Global Config section, enable AAA and click Apply. Figure 8-17 Global Config 2) Choose the menu Network Security > AAA > RADIUS Server to load the following page. Configure the Server IP as 192.168.0.10, the Shared Key as 123456, the Auth Port as 1812, and keep the other parameters as default. Click Add to add RADIUS Server 1 on the switch. Configuration Guide 469