TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 Configuration Guide - Page 72
Backing up the Configuration File, Switch>enable, Switch#copy tftp startup-config ip-address
View all TP-Link T1500-28TC TL-SL2428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Managing System System Tools Configurations Step 1 Step 2 enable Enter privileged mode. copy tftp startup-config ip-address ip-addr filename name Download the configuration file to the switch from TFTP server. ip-addr: Specify the IP address of the TFTP server. Both IPv4 and IPv6 addresses are supported. name: Specify the name of the configuration file to be downloaded. Note: • It will take a long time to restore the configuration. Please wait without any operation. • After the configuration is restored successfully, the device will reboot to make the configuration change effective. The following example shows how to restore the configuration file named file1 from the TFTP server with IP address 192.168.0.100. Switch>enable Switch#copy tftp startup-config ip-address 192.168.0.100 filename file1 Start to load user config file...... Operation OK! Now rebooting system...... 4.2.3 Backing up the Configuration File Follow these steps to back up the current configuration of the switch in a file: Step 1 enable Enter privileged mode. Step 2 copy startup-config tftp ip-address ip-addr filename name Back up the configuration file to TFTP server. ip-addr: Specify the IP address of the TFTP server. Both IPv4 and IPv6 addresses are supported. name: Specify the name of the configuration file to be saved. The following example shows how to backup the configuration file named file2 from TFTP server with IP address 192.168.0.100. Switch>enable Switch#copy startup-config tftp ip-address 192.168.0.100 filename file2 Start to backup user config file...... Backup user config file OK. Configuration Guide 51