TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 Configuration Guide - Page 567
Port Config
View all TP-Link T1500-28TC TL-SL2428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 567 highlights
Configuring LLDP LLDP-MED Configurations TTL Multiplier: 4 Tx Delay: 2 seconds Initialization Delay: 2 seconds Trap Notification Interval: 5 seconds Fast-packet Count: 3 LLDP-MED Fast Start Repeat Count: 4 Switch(config)#end Switch#copy running-config startup-config 3.2.2 Port Config Select the desired port, enable LLDP-MED and select the TLVs (Type/Length/Value) included in the outgoing LLDP packets according to your needs. Step 1 Step 2 Step 3 Step 4 Step 5 configure Enter global configuration mode. interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range gigabitEthernet port-list | ten-gigabitEthernet port | range ten-gigabitEthernet port-list ] Enter interface configuration mode. lldp med-status (Optional) Enable the LLDP-MED on the port. It is disabled by default. lldp med-tlv-select { [ inventory-management] [location] [network-policy] [power-management] [all ] } (Optional) Configure the LLDP-MED TLVs included in the outgoing LLDP packets. By default, the outgoing LLDP packets include all TLVs. If LLDP-MED Location TLV is selected, configure the parameters as follows: lldp med-location {emergency-number identifier | civic-address [language language | province-state province-state | lci-county-name county | lci-city city | street street | housenumber house-number | name name | postal-zipcode postal-zipcode | room-number roomnumber | post-office-box post-office-box | additional additional | country-code countrycode | what { dhcp-server | endpoint | switch } ] } Configure the LLDP-MED Location TLV included in the outgoing LLDP packets. Used to assign the location identifier information to the Endpoint devices. identifier: Configure the emergency number to call CAMA or PSAP. The number should contain 10-25 characters. language,province-state,county.etc: Configure the address in the IETF defined address format. show lldp interface { fastEthernet port | gigabitEthernet port | ten-gigabitEthernet port } Display LLDP configuration of the corresponding port. Configuration Guide 546