TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 Configuration Guide - Page 51

Managing System System Info Configurations Step 3 Step 4 Step 5 Step 6 location [ location ] Specify the system location of the switch. location: Enter the device location. It should consist of no more than 32 characters. By default, it is "SHENZHEN". contact-info [ contact-info ] Specify the system contact Information. contact-info: Enter the contact information. It should consist of no more than 32 characters. By default, it is "www.tp-link.com". show system-info Verify the system information including system Description, Device Name, Device Location, System Contact, Hardware Version, Firmware Version, System Time, Run Time and so on. end Return to privileged EXEC mode. Step 7 copy running-config startup-config Save the settings in the configuration file. The following example shows how to set the device name as Switch_A, set the location as BEIJING and set the contact information as http://www.tp-link.com. Switch#configure Switch(config)#hostname Switch_A Switch(config)#location BEIJING Switch(config)#contact-info http://www.tp-link.com Switch(config)#show system-info System Description - JetStream 48-Port Gigabit Smart Switch with 4 SFP Slots System Name - Switch_A System Location - BEIJING Contact Information - http://www.tp-link.com ... Switch(config)#end Switch#copy running-config startup-config 2.2.3 Setting the System Time Follow these steps and choose one method to set the system time: Configuration Guide 30