TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 Configuration Guide - Page 370

Configuring PoE PoE Power Management Configurations Step 7 show power inline Verify the global PoE information of the system. Step 8 show power inline configuration interface [ fastEthernet { port | port-list } | gigabitEthernet { port | port-list }] Verify the PoE configuration of the corresponding port. port: Specify the Ethernet port number, for example 1/0/1. port-list: Specify the list of Ethernet ports, in the format of 1/0/1-3, 1/0/5. Step 9 show power inline information interface [ fastEthernet { port | port-list } | gigabitEthernet { port | port-list }] Verify the real-time PoE status of the corresponding port. port: Specify the Ethernet port number, for example 1/0/1. port-list: Specify the list of Ethernet ports, in the format of 1/0/1-3, 1/0/5. Step 10 end Return to privileged EXEC mode. Step 11 copy running-config startup-config Save the settings in the configuration file. The following example shows how to set the system power limit as 160W. Set the priority as middle and set the power limit as class3 in the port 1/0/5. Switch#configure Switch(config)#power inline consumption 160 Switch(config)#interface fastEthernet 1/0/5 Switch(config-if)#power inline supply enable Switch(config-if)#power inline priority middle Switch(config-if)#power inline consumption class3 Switch(config-if)#show power inline System Power Limit: 160.0w System Power Consumption: 0.0w System Power Remain: 160.0w Switch(config-if)#show power inline configuration interface fastEthernet 1/0/5 Interface PoE-Status PoE-Prio Power-Limit(w) Time-Range PoE-Profile Fa1/0/5 Enable Middle Class3 No Limit None Configuration Guide 349