TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 Configuration Guide - Page 402

Configuring ACL ACL Configurations 2.2.3 ACL Binding and Policy Binding You can select ACL binding or Policy binding according to your needs. An ACL Rule and Policy takes effect only after they are bound to a port or VLAN.  ACL Binding You can bind the ACL to a port or a VLAN. The received packets will then be matched and processed according to the ACL rules. Step 1 configure Enter global configuration mode Step 2 interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range gigabitEthernet port-list} access-list bind acl acl-id (Optional) Enter the interface configuration mode and bind the ACL to the port. port | port-list: The port (ports) to which the policy will bind. policy-name: The name of the policy. interface vlan vlan-id access-list bind acl acl-id (Optional) Enter layer 3 interface configuration mode and bind the ACL to the VLAN. vlan-id: The VLAN to which the policy will bind. acl-id: The ID number of the ACL. Step 3 show access-list bind (Optional) View the configuration of binding. Step 4 end Return to privileged EXEC mode. Step 5 copy running-config startup-config Save the settings in the configuration file. The following example shows how to bind ACL 1 to port 3 and ACL 2 to VLAN 4: Switch#configure Switch(config)#interface fastEthernet 1/0/3 Switch(config-if)#access-list bind acl 1 Switch(config-if)#exit Switch(config)#interface vlan 4 Switch(config-if)#access-list bind acl 2 Switch(config-if)#show access-list bind Configuration Guide 381