TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 Configuration Guide - Page 517
Creating SNMP Communities, Switchconfig#snmp-server user
View all TP-Link T1500-28TC TL-SL2428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 517 highlights
Configuring SNMP & RMON SNMP Configurations security level, SHA as the authentication algorithm, 1234 as the authentication password, DES as the privacy algorithm and 1234 as the privacy password: Switch#configure Switch(config)#snmp-server user admin remote nms-monitor smode v3 slev authPriv cmode SHA cpwd 1234 emode DES epwd 1234 Switch(config)#show snmp-server user No. U-Name U-Type G-Name S-Mode S-Lev A-Mode P-Mode --- ------ ------ ------ ------ ----- 1 admin remote nms-monitor v3 authPriv SHA DES Switch(config)#end Switch#copy running-config startup-config 2.2.5 Creating SNMP Communities For SNMPv1 and SNMPv2c the Community Name is used for authentication, functioning as the password. Step 1 Step 2 Step 3 Step 4 Step 5 configure Enter global configuration mode. snmp-server community name { read-only | read-write } mib-view Configure the community. name: Enter a group name with 1 to 16 characters. read-only | read-write: Choose an access permissions for the community. Read-only indicates that the NMS can view but cannot modify parameters of the view, while read-write indicates that the NMS can both view and modify. mib-view: Enter a view to allow it to be accessed by the community. The name contains 1 to 61 characters. show snmp-server community Displays community entries. end Return to privileged EXEC mode. copy running-config startup-config Save the settings in the configuration file. The following example shows how to set an SNMP community. Name the community as the nms-monitor, and allow the NMS to view and modify parameters of View: Switch#configure Configuration Guide 496