TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 Configuration Guide - Page 85
Configuration Guide, Managing System, Access Security Configurations, show ip http secure-server
View all TP-Link T1500-28TC TL-SL2428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Managing System Access Security Configurations Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 ip http secure-ciphersuite { [ 3des-ede-cbc-sha ] [ rc4-128-md5 ] [ rc4-128-sha ] [ des-cbcsha ] } Enable the corresponding ciphersuite. By default, these types are all enabled. [ 3des-ede-cbc-sha ]: Key exchange with 3DES and DES-EDE3-CBC for message encryption and SHA for message digest. [ rc4-128-md5 ]: Key exchange with RC4 128-bit encryption and MD5 for message digest. [ rc4-128-sha ]: Key exchange with RC4 128-bit encryption and SHA for message digest. [ des-cbc-sha ]: Key exchange with DES-CBC for message encryption and SHA for message digest. ip http secure-session timeout minutes Specify the Session Timeout time. The system will log out automatically if users do nothing within the Session Timeout time. minutes: Specify the timeout time, which ranges from 5 to 30 minutes. The default value is 10. ip http secure-max-users admin-num operator-num power-user-num user-num Specify the maximum number of users that are allowed to connect to the HTTPS server. The total number of users should be no more than 16. admin-num: Enter the maximum number of users whose access level is Admin. The valid values are from 1 to 16. operator-num: Enter the maximum number of users whose access level is Operator, Power User or User. The valid values are from 0 to 15. power-user-num: Enter the maximum number of users whose access level is Power User,. The valid values are from 0 to 15. user-num: Enter the maximum number of users whose access level is User,. The valid values are from 0 to 15. ip http secure-server download certificate ssl-cert ip-address ip-addr Download the desired certificate to the switch from TFTP server. ssl-cert: Specify the name of the SSL certificate, which ranges from 1 to 25 characters. The certificate must be BASE64 encoded. The SSL certificate and key downloaded must match each other. ip-addr: Specify the IP address of the TFTP server. Both IPv4 and IPv6 addresses are supported. ip http secure-server download key ssl-key ip-address ip-addr Download the desired key to the switch from TFTP server. ssl-key: Specify the name of the key file saved in TFTP server. The key must be BASE64 encoded. ip-addr: Specify the IP address of the TFTP server. Both IPv4 and IPv6 addresses are supported. show ip http secure-server Verify the global configuration of HTTPS. Configuration Guide 64