TP-Link TL-R460 User Guide - Page 22
Cable/DSL Router User Guide - default ip
UPC - 845973040031
View all TP-Link TL-R460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
TL-R460 Cable/DSL Router User Guide Figure 4-1 ¾ LAN - This field displays the current settings or information for the LAN, including the "MAC address", "IP address" and "Subnet Mask". ¾ WAN - This field displays the parameters applied to the WAN port of the router, including "MAC address", "IP address", "Subnet Mask", "Default Gateway" and so on. ) Note: If PPPoE/L2TP/PPTP is chosen as the WAN connection type, the Disconnect button will be shown here while you are accessing the Internet. You can also cut the connection by clicking the button. If you have not connected to the Internet, a Connect button will be 15
TL-R460
Cable/DSL Router User Guide
15
Figure 4-1
¾
LAN
-
This field displays the current settings or information for the LAN, including
the “MAC address”, “IP address” and “Subnet Mask”.
¾
WAN
-
This field displays the parameters applied to the WAN port of the router,
including “MAC address”, “IP address”, “Subnet Mask”, “Default Gateway” and so
on.
)
Note:
If PPPoE/L2TP/PPTP is chosen as the WAN connection type, the
Disconnect
button will
be shown here while you are accessing the Internet. You can also cut the connection by
clicking the button. If you have not connected to the Internet, a
Connect
button will be