Toshiba 40E220U User Guide - Page 110
IVlPEG, Reduction
View all Toshiba 40E220U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
110 UsingtheTV'sAdvancedFeatures Using the advanced picture settings 2 Highlight Noise Reduction, and then press the ENTER button. 3 In the CableClear field, select the desired setting. The available selections are Off. Low. Middle, and High. Low, Middle, and High will reduce the noise in varying degrees, from lowest to highest, respectively. NOTE If thecurrentinputis ANT/CABLEor VIDEOt,hemenuwill display thetext"CableClear"I.fthecurrentinputis ColorStreamHD,HDMI1 or HDMI2, themenuwill displaythetext "DNR". 4 To save your new settings, highlight Done, and then press the ENTER button. To revert to your original settings, highlight Reset, and then press the ENTER button. IVlPEGNoise Reduction The MPEG Noise Reduction feature allows you to reduce visible interference caused by MPEG compression. Choices for MPEG Noise Reduction are Off, Low, Middle, and High. Off is automatically selected when this feature is disabled ("grayed out"). To select the MPEG Noise Reduction level: 1 Press the MENU button and open the Picture menu. 2 Highlight Noise Reduction, and then press the ENTER button. 3 Press the (A/Y arrow) buttons to highlight the MPEG Noise Reduction field, and then press the (_/_ arrow) buttons to select either Off, Low, Middle, or High. 4 To save your new settings, highlight Done, and then press the ENTER button. To revert to your original settings, highlight Reset, and then press the ENTER button.