Toshiba 40E220U User Guide - Page 63
Switching, Channel, SurfLock
View all Toshiba 40E220U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
UsingtheTV'sfeatures _ Tuning channels using the Channel Browser TM Tuning digital channels: €. Press the Channel Number (0-9) on the remote control, followed by the 100 button, and then tile sub-channel number. For example, to select digital channel 125-1, press 1, 2, 5, -, 1, and then press the ENTER button. NOTE If a digitalchannelis not programmede,itherthroughtheautomatic channesl canor theChanneal ddfunction,see"Addingand clearing channelsandinputsin theHistoryList"on page62,youwill haveto tunetheRFchanneul singtheChanneNl umbersandthe100button on theremotecontrol. Switchingbetweentwo channelsusingChannelReturn The Channel Return feature allows you to switch between two channels without entering an actual channel number each time. 1 Select the first channel you want to view. 2 Select a second channel using the Channel Number buttons (and the 100 button if selecting a digital channel). 3 Press the CIt RTN button on the remote control. The previous channel will display. Each time you press the CIt RTN button, the TV will switch back and forth between the last two channels that were tuned. NOTE If youpresstheCHRTNbuttonfroma non-antennainput,theTVwill returntothe last-viewedinput. Switchingbetweentwo channelsusingSurfLockTM The SurfLock TM feature temporarily "memorizes" one channel to the CH RTN button, so you can return to that channel quickly from any other channel by pressing the CH RTN button. To memorize a channel to the CH RTN button: 1 Tune the TV to the channel you wish to program into the CH RTN button. Press and hold the CIt RTN button for a few seconds until the message "Memorized" appears on the screen. The channel has been programmed to the CH RTN button. You can then change channels repeatedly, and when you press the CH RTN button, the memorized channel will be tuned.