Toshiba 42HL196 Operation Guide - Page 54

Chapter 6: Using the TV's advanced features Using MPEG noise reduction The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. Choices for MPEG noise reduction are Off, Low, Middle, and High. Off is automatically selected when this feature is disabled ("grayed out"). To select the MPEG noise reduction level: 1 Press Y and open the Video menu. 2 Highlight Advanced Picture Settings and press T. 3 Press B or b to highlight the MPEG Noise Reduction field, and then press C or c to select either Off, Low, Middle or High. Advanced Picture Settings ANT 1 Dynamic Contrast CableClear MPEG Noise Reduction Color Temperature Game Mode On Auto Low Cool Off Reset Done 4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T. Selecting the color temperature You can change the quality of the picture by selecting from three preset color temperatures (cool, medium, and warm), as described below. Mode cool medium warm Picture Quality blueish neutral reddish To select the color temperature: 1 Press Y and open the Video menu. 2 Highlight Advanced Picture Settings and press T. 3 In the Color Temperature field, select the mode you prefer (Cool, Medium, or Warm). Advanced Picture Settings ANT 1 Dynamic Contrast CableClear MPEG Noise Reduction Color Temperature Game Mode On Auto Low Cool Off Reset Done 4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T. Note: If you select one of the factory-set picture modes (Sports, Standard, or Movie) and then change the color temperature mode, the picture mode automatically changes to Preference in the Picture Settings menu. 54