Toshiba P47LSB User Manual - Page 18

WIRELESS REMOTE CONTROL OPERATION Normal Adjust Area MENU: Enter Adjust Menu Up button: move UP Left button: move LEFT Right button: move RIGHT Down button: move DOWN ENTER: Value Enter or Set AUTO: Automatic picture set EXIT: Quit function item PIP: Display PiP on-off SWITCH: exchange Main/PiP SOURCE: Input selection Pro-Adjust Area: This is the operation of special adjustment similar to RS232C controls. OSD becomes different from Normal adjustment. Magnification/Layout and Pix-Effect Memory need to use this Pro-Adjust mode. Battery Replacement (1) (3) Pro-Adjust Area ADJ: Enter to Adjust Mode: Mode selection (memory recall) SPECIAL: Enter Special mode SERVICE: Enter service mode WB: White Balance selection ID: Enter ID mode 0- F: ID selection ID ENTER: Set selected ID ID SW: ID Switch selection ID SET: Assign ID ID CLR: Clear ID MAG: Magnification LAYOUT: Picture Layout POSI.: Picture position @ MAG BRT: Brightness CONT: Contrast COLOR: Color Adjustment OFFSET: RGB Dark Level GAIN: RGB bright Level TINT: Hue adjustment R: Select Red G: Select Green B: Select Blue TEST.P: Test Pattern To replace the battery inside 1) Push a little as (1) in the left picture and pull The back cover (2) out. 2) Replace with new battery, 2 pieces of AAA type as (3). 3) Attach back cover (2) into an original place. 4) Follow the city's law to dispose used batteries. 5) Avoid keeping used, old battery inside the (2) remote control, causing leakage of internal liquid resulting metal rust or fatal damage to the remote control hand unit. CAUTION Risk of explosion if the battery is replaced by an Incorrect type or placed by wrong polarity. Dispose of used battery according to the instructions. 18