Toshiba Satellite A300 Maintenance Manual - Page 104
Procedure 3, Format Check, FORMAT, C:/S/U
View all Toshiba Satellite A300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
2 Troubleshooting Procedures Procedure 3 Format Check The computer's HDD is formatted using the MS-DOS FORMAT program or the physical format program of the test program. To format the HDD, start with Check 1 below and perform the other steps as required. Refer to the MS-DOS Manual for the operation of MS-DOS. For the format by the test program, refer to the Chapter 3. Check 1 Format an 2.5" HDD using MS-DOS FORMAT command. Type as FORMAT C:/S/U. If 2.5" HDD can not be formatted, perform Check 2. Check 2 Using the MS-DOS FDISK command, set the 2.5" HDD partition. If the partition is not set, go to Check 3. If it is set, format 2.5" HDD using MS-DOS FORMAT command. Check 3 Using the Diagnostic Disk, format 2.5" HDD with a format option (physical format). If HDD is formatted, set the 2.5" HDD partition using MS-DOS FDISK command. If you cannot format 2.5" HDD using the Tests and Diagnostic program, go to Procedure 4. Satellite A300 Maintenance Manual (960-Q08) 28