Toshiba Satellite A300 Maintenance Manual - Page 142
HDD, Removing a HDD, screws, HDD slot, cover, HDD assembly
View all Toshiba Satellite A300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Replacement Procedures 4.4 HDD Removing a HDD The following describes the procedure for removing a HDD (See Figure 4-3 to 4-4). CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause data loss or damage to the device. 1. Turn the computer upside down. 2. Remove the following screws securing a HDD slot cover and remove a HDD slot cover. • M2.5×3.0B FLAT BIND screw x2 3. Remove the following screws securing the HDD assembly. • M2.5×3.0B FLAT BIND screw x2 4. Disconnect the HDD assembly from the connector on the system board. Satellite A300 Maintenance Manual(960-Q08) 4-13
Replacement Procedures
Satellite A300
Maintenance Manual(960-Q08)
4-13
4.4
HDD
Removing a HDD
The following describes the procedure for removing a HDD (See Figure 4-3 to 4-4).
CAUTION:
Take care not to press on the top or bottom of a HDD. Pressure may cause
data loss or damage to the device.
1.
Turn the computer upside down.
2.
Remove the following
screws
securing a HDD slot cover and remove a
HDD slot
cover
.
•
M2.5
×
3.0B
FLAT BIND screw
x2
3.
Remove the following
screws
securing the
HDD assembly
.
•
M2.5
×
3.0B
FLAT BIND screw
x2
4.
Disconnect the
HDD assembly
from the connector on the system board
.