Toshiba Satellite A300 Maintenance Manual - Page 173
LCD unit / FL inverter, Removing the LCD unit / FL inverter
View all Toshiba Satellite A300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
Replacement Procedures 4.15 LCD unit / FL inverter CAUTION: When replacing a LCD, it is required that SVP parameter is set. Update with the latest EC/KBC as described in Appendix H "EC/KBC Rewrite Procedures". Removing the LCD unit / FL inverter The following describes the procedure for removing the LCD unit and FL inverter (See Figure 4-30 to 4-33) Remove Screw rubber cover x6 1. Remove the following screws securing the display mask M2.5×5.0 BIND screw X6 2. Insert your finger between the edge of the display mask and the LCD, and remove the display mask while releasing the latches of display mask. Satellite A300 Maintenance Manual(960-Q08) 42
Replacement Procedures
4.15 LCD unit / FL inverter
CAUTION:
When replacing a LCD, it is required that SVP parameter is set. Update with
the latest EC/KBC as described in Appendix H “EC/KBC Rewrite
Procedures”.
Removing the LCD unit / FL inverter
The following describes the procedure for removing the LCD unit and FL inverter (See
Figure 4-30 to 4-33)
Remove Screw rubber cover x6
1.
Remove the following
screws
securing the display mask
M2.5
×
5.0
BIND screw
X6
2.
Insert your finger between the edge of the display mask and the
LCD
, and remove the
display mask
while releasing the latches of display mask.
42
Satellite A300 Maintenance Manual(960-Q08)