Toshiba Satellite A300 Maintenance Manual - Page 111
Display Troubleshooting, Procedure 1, External Monitor Check
View all Toshiba Satellite A300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Troubleshooting Procedures 2.9 Display Troubleshooting To check if the computer's display is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: External Monitor Check Procedure 2: Diagnostic Test Program Execution Check Procedure 3: Connector and Cable Check Procedure 4: Replacement Check Procedure 1 External Monitor Check Connect an external monitor to the computer's external monitor port, then boot the computer. The computer automatically detects the external monitor. If the external monitor works correctly, the internal LCD may be faulty. Go to Procedure 3. If the external monitor appears to have the same problem as the internal monitor, system board may be faulty. Go to Procedure 2. Procedure 2 Diagnostic Test Program Execution Check The Display Test program is stored in Diagnostics disk. This program checks the display controller on system board. Insert the Diagnostics disk in the USB FDD, turn on the computer and run the test. Refer to Chapter 3, Tests and Diagnostics for details. If an error is detected, go to Procedure 3. Satellite A300 Maintenance Manual (960-Q08) 35